Intelligent round metal 3D ballpoint pen for 3D drawing pen
Key points: 1).high end metal housing,super slim design 2).Can be driven by power bank, no need connect to AC/DC adapter 3).Double click loading/unloading button to filling and remove filament automatically 4).OLED screen, which can display company information, temperature, speed and material 5).OSD language: multi-language customized
2.Parameters: 1).Voltage: 5V 2A (available for power bank)
1).connect AC/DC adapter to AC power socket and 3D pen DC power socket (or use the USB cable to connect with the power bank which output is more than 2A), when the red LED turns on,the pen is in the stanby status. 2). press the filament loading button,it starts to heat,and the green light will flash,after around 40 seconds ,the green light stop flashing,it means it is ready for loading filament 3).insert the 1.75mm filament into the "filament loading hole",Keep pressing the "filament loading button",the material will be loaded . Hold till plastic material comes out from the nozzle ,it means the filament is ready.( Double press the button can load the filament automatically, press the button again to exit automatic mode) 4). temperature adjustment :open the black cover ,and use the plastic screwdriver to turn the temperature switch(clockwise temperature up,anticlockwise temperature down,each level is 15°C),temperature range is 130°C-240°C 5).speed adjustment :slip the speed controller to adjust the speed 6). unload filament:do as the Item 2,then press unload filament button ,the filament will move out automatically.(Double press the button can unload the filament automatically, press the button again to exit automatic mode) 7). replace nozzle set:open the black cover by the plastic screwdriver ,and remove the screw,then plug off the nozzle set 8). the pen will enter standby mode after 2 minutes no operation,and press the loading filament button to wake it up. 9).do not touch the nozzle during working
We have CE, ROHS, FCC approved not only ISO
History of JER Changsha Haili Electronic Technology Development Co., Ltd JER Education Technology Co.,Limited is a professional company that produce and sell education products ,such as analogue language learning system and digital language learning system for Middle and primary, and language learning software that apply to company for high school and university students. We also provide Multi-media classroom, Network classroom, physics and chemical laboratory equipments, JER started this field in 2001, and in 2004, we were qualified by ISO9001:2000 and passed CE certification.
And since 2014, we started to produce 3D pen. As far now we 3pens with patent hot selling in the market called RP600A, RP700A, RP800A. We have mature technology and experience on this field . Recently we will launch our new metal 3D pen RP900A and chocolate pen.
After around 10 years of development, JER has owned a professional and experienced R&D and production team. At the same time, we have got very rich experience on management and sales, which ensure us to offer the best quality and the best service to our customers. Till now we have sold our products to more than 30 countries of the world, especially in Southeast Asia, Africa and the Middle East, our products also cover all of the provinces of China.
To catch the trend of marketing, we put much effort on developing new products every year. Under the efforts of all staff, now JER has grown into the leading manufactory of education device in China, especially in language learning system field.
Profession, concentration is the theory of our company. JER Education Technology Co.,Limited is your best choice to be a education products supplier.Education products for the global Wanted agents and OEM / ODM partners, please Concact us to discuss!
We sincerely look forward to cooperating with you and create a bright future together.
Since 2013, we have attended many Electronic Fair like Hongkong Electronic Fair, IFA Berlin show, CES etc.
Pictures as below is from Hongkong Electronic Fair Time: 13th to 16th, April. 2016 3D Printer pen booth:5BC 5C-A09
Below are details of the exhibition from our Indonesia client: PT. Dell Pan Tunggal Corp
Name of The Exhibition: World Digital Printing 2016
Date and Place: May 2016, located in Jakarta, Indonesia
2016 IFA Global Market@Station Berlin on Sep.4th-7th. Booth number is # S7-536.9.
1. Can I leave the filament in the 3D pen when I shut the pen down?
Please don't! We've found that leaving warm filament in the pen can cause issues with the pen.
2. Is the filament hot when it comes out of the 3D pen nozzle?
The Filament is hot when it emerges from the tip of the 3D pen.
Please don’t touch the nozzle tip, as the nozzle gets very hot and can cause burns.
3. Is the JER 3D pen safe for children
It is for ages 8+. . It has a ceramic tip that can get as hot as 70°C
4. Can I only insert 1.75mm filament into the 3D pen